Welcome to destall.com on July 6 2009.
This is an internet experiment running to monitor browsing habbits of individuals through wikipedia contents.

Electromagnetic four-potential

From Wikipedia, the free encyclopedia

  (Redirected from Four-potential)
Jump to: navigation, search
Electromagnetism
Electricity · Magnetism
Covariant formulation
Electromagnetic tensor · EM Stress-energy tensor · Four-current · Electromagnetic four-potential ·

The electromagnetic four-potential is a covariant four-vector defined in volt·seconds/meter (and in maxwell/centimeter in parentheses) as

A_{\alpha} = \left(- \frac{\phi}{c}, \vec A \right) \qquad \left(A_{\alpha} = (- \phi, \vec A)\right)

in which φ is the electrical potential, and \vec A is the magnetic potential, a vector potential.

The electric and magnetic fields associated with these four-potentials are:

\vec{E} = -\vec{\nabla} \phi - \frac{\partial \vec{A}}{\partial t}   \qquad   \left( -\vec{\nabla} \phi - \frac{1}{c} \frac{\partial \vec{A}}{\partial t} \right)
\vec{B} = \vec{\nabla} \times \vec{A}

It is useful to group the potentials together in this form because Aα is a covariant vector. This means that it transforms in the same way as the gradient of a scalar, e.g. \frac{\partial \psi}{\partial x^{\alpha}}\,, under arbitrary curvilinear coordinate transformations. So, for example, the inner product

A_{\alpha} g^{\alpha \beta} A_{\beta} = |\vec{A}|^2 -\frac{\phi^2}{c^2} \qquad  \left(A_{\alpha} g^{\alpha \beta} A_{\beta} \, = |\vec{A}|^2 - \phi^2 \right)

is the same in every inertial frame of reference.

Often, physicists employ the Lorenz gauge condition \partial_{\alpha} A^{\alpha} = 0 in an inertial frame of reference to simplify Maxwell's equations as:

\Box A_{\alpha} = -\mu_0 \eta_{\alpha \beta} J^{\beta}   \qquad   \left( \Box A_{\alpha} = -\frac{4 \pi}{c} \eta_{\alpha \beta} J^{\beta} \right)

where J^{\beta} \, are the components of the four-current,

and

\Box = \nabla^2 -\frac{1}{c^2} \frac{\partial^2} {\partial t^2} is the d'Alembertian operator.

In terms of the scalar and vector potentials, this last equation becomes:

\Box \phi = -\frac{\rho}{\epsilon_0}    \qquad   \left(\Box \phi = -4 \pi \rho \right)
\Box \vec{A} = -\mu_0 \vec{j}   \qquad   \left( \Box \vec{A} = -\frac{4 \pi}{c} \vec{j} \right)

For a given charge and current distribution, \rho(\vec{x},t) and \vec{j}(\vec{x},t), the solutions to these equations in SI units are

\phi (\vec{x}, t) = \frac{1}{4 \pi \epsilon_0} \int \mathrm{d}^3 x^\prime \frac{\rho( \vec{x}^\prime, \tau)}{ \left| \vec{x} - \vec{x}^\prime \right|}
\vec A (\vec{x}, t) = \frac{\mu_0}{4 \pi} \int \mathrm{d}^3 x^\prime \frac{\vec{j}( \vec{x}^\prime, \tau)}{ \left| \vec{x} - \vec{x}^\prime \right|},

where \tau = t - \frac{\left|\vec{x}-\vec{x}'\right|}{c} is the retarded time. This is sometimes also expressed with \rho(\vec{x}',\tau)=[\rho(\vec{x}',t)], where the square brackets are meant to indicate that the time should be evaluated at the retarded time. Of course, since the above equations are simply the solution to an inhomogeneous differential equation, any solution to the homogeneous equation can be added to these to satisfy the boundary conditions. These homogeneous solutions in general represent waves propagating from sources outside the boundary.

When the integrals above are evaluated for typical cases, e.g. of an oscillating current (or charge), they are found to give both a magnetic field component varying as r − 2 (the induction field) and a component decreasing as r − 1 (the radiation field).

[edit] References

  • Rindler, Wolfgang (1991). Introduction to Special Relativity (2nd). Oxford: Oxford University Press. ISBN 0-19-853952-5. 
  • Jackson, J D (1999). Classical Electrodynamics (3rd). New York: Wiley. ISBN ISBN 0-471-30932-X. 

[edit] See also

Personal tools

Visit joltnews for the latest headlines
Visit bloit.com for company information
Geed Media does computer consulting on long island.
This page viewed times. See Logs